User manual and frequently asked questions Intense Pure Air XL

Pure air for healthier life!

Intense Pure Air is a high-performance air purifier enhanced with extreme silence and complete protection that covers up to 99.99% of allergens and. Four levels of filtration protect the entire family from a wide variety of pollutants. Featuring the new True HEPA Allergy+ particle filter and the exclusive and patented NanoCaptur technology, which works to permanently destroy formaldehyde** for a safer, healthier environment.

Reference : PU6020U2

Documentation

FAQ

Place the purifier on a flat, stable surface in the room requiring treatment. To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance.
• The pre-filter must be cleaned every 2 to 4 weeks.
• The active carbon filter must be replaced when the "Odor" indicator light lights up, otherwise at least every year.
• The HEPA filter must be replaced when the "HEPA" indicator light lights up, otherwise at least every 3 years.
• The NanoCaptur filter must be replaced according to the saturation indicator (refer to the colour chart on the filter); check the degree of saturation every 6 months.
Guidelines based on 8 hours of use per day at speed 2.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.
Your appliance is in manual mode, select the correct operational function.
Check when the filters were last cleaned and replaced, and clean/replace the filter(s) if necessary.
There may be several reasons:
• A layer of dust is covering the senor lense; clean the sensor lense.
• If the light still indicates that the air quality is poor, adjust the sensitivity sensor to 'Low sensitivity' or 'Average'; to make this change, check the instructions manual.
• If the light still indicates that the air quality is good, adjust the sensitivity sensor to 'Sensitive' or 'Average'; to make this change, check the instructions.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Warranty section of the website.

The 'Intense Pure Air' air purifier allows you to breathe up to 99.95% pure air in your home, and as such to protect your health thanks to the four levels of filtration described below:
• Level 1: PRE-FILTER for dust, hair, fur
• Level 2: ACTIVE CARBON FILTER for volatile organic compounds (VOCs), odours / gases
• Level 3: HEPA FILTER for fine particles (PM2.5), pollens, acarids, animal allergens, mould, bacteria / viruses
• Level 4: NANOCAPTUR FILTER for formaldehyde