ROWENTA Pure Pop Handheld Steamer for Clothes Green
Pure Pop Handheld Steamer for Clothes GreenGarment Steamer, Reversible Steam Pad with Lint Remover
Take your fabric care to the next level with this compact handheld steamer that lets you steam any style on the go without an ironing board! With an intuitive design, this steamer heats up in less than 15 seconds, allowing you to get the job done quickly and efficiently. Pure Pop purifies and steams in one simple, smooth movement, providing you with unparalleled results that will leave you looking and feeling your best. With the reversible pad system, you can effortlessly switch between a velvet side that's perfect for steaming even the most delicate textiles, and a lint-remover side that removes hair and lint from your garment.
Reference : DR2024U1
*Viruses: External tests, Sept. 20, on BCoV-1 and Murine Norovirus on cotton fabric. Bacteria and germs: External tests on Staphylococcus aureus, Klebsiella pneumonae, Escherichia coli. Under careful condition of use. See www.rowenta.com
ProductBenefits
Voir la description du produit
Garment Steamer, Reversible Steam Pad with Lint Remover
Say goodbye to creases and hello to style with Pure Pop's water tank that can offer 5 minutes of continuous steam. This amazing steamer can provide a steam rate of up to 20g/min, ensuring that you get the job done quickly and efficiently. Discover the ultimate Handheld Garment Steamer that will be your new favourite accessory to keep your clothing looking sharp and well-maintained.Voir la description du produit
Technical specifications / comparison
| Power | 1150
W |
| Usage | Vertical
|
| Steam output | up to 20
g/min |
| Heat-up time | 15
s |
| Water tank capacity | 70
ml |
| Power cord length | 2
m |
| Autonomy | 4
min |
| Steam ready indicator |
|
| Colours | GREEN
|
| Type of plug | UL/US
|
| Plug color | BLACK
|
Voir les produits
See the offer of Accessories Store
Voir les documents liés
Voir les questions les plus fréquentes
FAQ
• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Warranty section of the website.
