ROWENTA Master Precision 360°
Master Precision 360°Comfort & Precision in one hand
Rowenta's Master Precision 360° Garment Steamer smoothes out creases and removes odors quickly and efficiently, even in difficult-to-reach areas, thanks to the precision shot feature. So whether you’re in a rush or need to freshen up a dress for dinner, it will help you steam through your laundry in no time. Featured also with a multi positions rotative hanger, Master Precision 360° is perfectly suited to steam and remove wrinkles from a wide variety of fabrics.
Reference : IS6540Q1
ProductBenefits
Voir la description du produit
ROWENTA GARMENT STEAMER : EASY & EFFICIENT STEAMING
Rowenta Master Precision 360° Garment Steamer offers the perfect steaming solution, smoothing out creases, refreshing or sanitizing clothes with speed and ease.
Thanks to the 360° rotative hanger you can steam the front and back of any garment with ease, using the precision shot feature to steam even hard to reach areas.
And with the large 2.5 L water tank, you can work your way through the ironing without interruption for up to 80 minutes.
It's suitable for even the most delicate garments and ideal for last-minute touch-ups.
Ready to use in just 45 seconds and simple to operate, the steamer comes equipped with an adjustable pole, a robust hanger, integrated pant clips, large wheels for easy use throughout the home, and three handy accessories.
This is an easily transportable device that will help refresh and sanitize your clothes in no time !
Voir la description du produit
Technical specifications / comparison
| Power | 1500
W |
N/A | 1550
W |
| Steam output | 30
g/min |
N/A | 35
g/min |
| Heat-up time | 45
s |
60
s |
60
s |
| Water tank capacity | 2,5
L |
2.4
L |
3.8
L |
| Power cord length | 2
m |
N/A | 2
m |
| Autonomy | 80
min |
80
min |
N/A |
| Wheels |
|
|
|
| Colours | Black / Raspberry
|
Chocolate
|
N/A |
Voir les produits
See the offer of Accessories Store
Voir les documents liés
Voir les questions les plus fréquentes
FAQ
• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water
In order to ensure the best performance from your iron, these types of water should not be used for ironing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.
The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.
Your appliance has limescale, consult the "Descaling" section in the instructions.
The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.
After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre
Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.
If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Warranty section of the website.
Voir les produits
